Care, Warranty, and Resizing
This store stands behind its finished jewelry with three confirmed policies, and this guide states them exactly as confirmed, with nothing added. First, a lifetime warranty. Second, 30 day free returns with no restocking fee on finished pieces, with one plain exception: custom and made to order pieces are non-returnable. Third, one free resizing where the design allows, with one plain exception: a full eternity band cannot be resized, so order the exact size for that style. Everything after the policy sections is general jewelry care education, verified against two independent sources per claim: how to clean by stone and metal, how to store pieces so they do not damage each other, and when to have prongs and settings checked. Where warranty coverage detail is not confirmed, this guide does not guess it. It tells you what to ask, and links to the store warranty page.
Quick facts
| Question | Short answer |
|---|---|
| What warranty applies? | A lifetime warranty on finished jewelry |
| What is the returns policy? | 30 day free returns with no restocking fee on finished pieces |
| Are custom pieces returnable? | No. Custom and made to order pieces are non-returnable |
| Is resizing included? | One free resizing where the design allows |
| What cannot be resized? | A full eternity band. Order the exact size |
| How do I clean diamond jewelry at home? | Warm water, a few drops of mild soap, a soft brush, dry with a lint free cloth |
| How should jewelry be stored? | Each piece in its own soft lined space. Diamonds scratch other jewelry, including other diamonds |
| When should prongs be checked? | Professionally every 6 to 12 months for a piece worn daily, and at once if a stone moves or a prong catches |
The three confirmed policies, stated plainly
Lifetime warranty
Finished jewelry from this store is covered by a lifetime warranty. That is the confirmed policy line, and it is the whole of what this guide claims about coverage.
Coverage detail beyond that line, such as exactly which kinds of damage are included or excluded, is not stated here, because it is not part of the confirmed policy wording this guide is built on. The store warranty page is the document to read for the terms that apply to your piece: https://www.thestellariscollection.com/pages/warranty
Before you rely on the warranty for a specific situation, ask these questions and get the answers for your piece:
- Does the warranty cover manufacturing defects, and how is a defect told apart from wear or accidental damage?
- Is accidental damage covered, such as a bent prong, a cracked setting, or a stone lost after a knock?
- Are routine services covered, such as prong retipping, clasp repair, or chain repair?
- What do you need to keep or present to use the warranty, such as an order number or the original paperwork?
- Are cleanings and inspections included, and how do you arrange one?
Asking first is not a lack of coverage. It is how you avoid assuming a term that was never promised, in either direction.
30 day free returns, with the custom exception stated plainly
Finished pieces can be returned within 30 days, free, with no restocking fee. That is the confirmed policy for finished jewelry.
The exception, stated as plainly as the policy itself: custom and made to order pieces are non-returnable. A piece made for you, to your specification, cannot be returned under the finished piece policy. If you are ordering a custom piece, decide on that basis: check the design, the size, and the details before the order is placed, because the 30 day return window does not apply to it.
One free resizing, with the full eternity exception
One free resizing is included where the design allows. A plain band is the easiest ring to resize, because a jeweler can cut its plain shank, add or remove metal, and rejoin it. A band with a plain section, such as a half eternity design, can usually be resized within limits through that section.
A full eternity band cannot be resized. Its stones run all the way around the band, so there is no plain section to cut. The free resizing does not apply to that style, and the correct size has to be ordered at the start. The Ring Size Guide linked below is the page to use before ordering any ring, and it matters most for this one.
Resizing also has general limits that apply anywhere, not only here. A design with stones set continuously, such as pave or channel work, cannot be resized as easily as a plain band, because stretching or cutting near the settings can loosen stones. When in doubt about a specific design, ask whether that design can be resized before you order it, not after. For construction differences by band type and how they affect resizing, see Diamond Bands Compared, the sibling guide linked below.
How do you clean jewelry by stone and metal?
Start with the gentlest method that suits the piece, and let the most delicate material in the piece set the method.
Diamonds, in gold or platinum
Diamond is the hardest gem material, at 10 on the Mohs scale, and it is a natural magnet for grease, which is why a worn diamond dulls quickly. The standard home clean, recommended by GIA, is simple:
- Soak the piece in warm water with a few drops of mild dish soap.
- Brush gently with a soft, clean toothbrush, especially behind the stone, where oil and dirt collect most.
- Rinse in a bowl of clean water rather than over an open drain, and dry with a soft, lint free cloth.
Never use chlorine bleach or abrasive cleaners such as powdered household cleansers or toothpaste on diamond jewelry. Chlorine can damage some of the metals used to alloy gold, and abrasives can scratch gold and other metals. Treat ultrasonic and steam cleaners with caution at home: GIA advises that they can loosen stones in their settings, and jewelry professionals check a piece for loose stones before using an ultrasonic or steam cleaner on it. If a piece needs a machine clean, that check comes first.
Lab grown diamonds are the same material as natural diamonds and take the same care. There is no separate cleaning routine for them.
Gold and platinum without stones, or with hard stones
Plain gold and platinum pieces, and pieces set with hard stones such as diamond, sapphire, or ruby, take the same warm soapy water method: a short soak, a gentle brush, a rinse, and a full dry with a lint free cloth. Platinum does not tarnish, but it develops a soft patina of fine scratches with wear, which is normal and can be polished by a jeweler if you prefer the original finish. White gold is usually rhodium plated: use a plain soft cloth rather than abrasive polishes, which wear the plating.
Softer and treated stones: the gentle rule
Not every stone takes the diamond routine. Softer, porous, or treated stones, including pearl, opal, emerald, and turquoise, need a gentler approach:
- Wipe pearls with a soft cloth after wear, and clean them with a barely damp cloth rather than soaking. Never put pearls in an ultrasonic or steam cleaner, and keep them away from perfume, hairspray, and household chemicals.
- Give emerald, opal, and other soft or treated stones a brief, gentle wash or a wipe with a damp cloth instead of a soak, and keep them out of ultrasonic and steam cleaners, which can damage treated material and loosen settings.
- If a piece mixes stones, follow the most delicate stone in it. If you do not know whether a stone has been treated, ask before using any machine or chemical cleaner on it.
Rule of thumb: when a piece mixes stones or materials, follow the most delicate one.
How should jewelry be stored?
Storage is where a surprising share of jewelry damage happens, because pieces rest against each other for long stretches.
- Store each piece in its own soft lined space: its own compartment, pouch, or box. One piece per pouch, because several pieces loose in one pouch still touch.
- Keep diamond pieces apart from everything else. A diamond scratches every other material in a jewelry box, including other diamonds and the metals of other settings.
- Lay chains and tennis pieces flat and fastened, or hang them, so they do not knot. A tangled chain pulled straight is a chain under strain at its weakest links.
- Put jewelry on last, after lotion, perfume, and hairspray, and take it off before swimming, sport, and heavy tasks.
- When you travel, carry pieces in a case with separate sections, never loose together in a bag.
When should prongs and settings be checked?
Cleaning keeps a piece bright. Inspection keeps its stones in it. The two are different jobs.
Prongs are small claws of metal bent over the edge of a stone. They wear thin, bend, and lift with daily use, and a lifted prong is how a secure stone becomes a lost one. For a piece worn every day, such as an engagement ring or a wedding band, have the prongs and settings professionally checked every 6 to 12 months. Pieces worn occasionally can be checked about once a year. A professional check looks at each prong under magnification, tests whether any stone moves, and checks clasps and links at the same visit.
Do not wait for the scheduled check if you notice any of these:
- A stone that moves, rattles, or clicks when the piece is tapped gently.
- A prong that catches on fabric, feels sharp, or looks bent, lifted, or flat.
- A clasp that no longer closes firmly, or a chain or link that catches or feels rough.
Stop wearing the piece until it is checked. Cleaning cannot fix a loose setting, and continued wear is what turns a loose stone into a lost stone.
Frequently asked questions
What does the lifetime warranty cover?
The confirmed policy is a lifetime warranty on finished jewelry. The specific coverage terms for a situation, such as accidental damage or a lost stone, are not stated in this guide, because they are not part of the confirmed policy wording it is built on. Read the warranty page for the terms that apply to your piece, and ask the questions listed in the warranty section above before you rely on coverage for a specific repair: https://www.thestellariscollection.com/pages/warranty
Can I return a custom piece?
No. Custom and made to order pieces are non-returnable. The 30 day free returns policy, with no restocking fee, applies to finished pieces. Decide custom orders on that basis and confirm size and design details before ordering.
Is resizing really free, and what are the limits?
One free resizing is included where the design allows. Plain bands resize most easily, and bands with a plain section usually resize within limits. A full eternity band cannot be resized at all, because its stones run all the way around, so it must be ordered in the exact size and the free resizing does not apply to it.
How often should I clean a diamond ring at home?
Regularly, with the gentle method: warm water, a few drops of mild soap, a soft brush, a rinse in a bowl, and a lint free cloth. Diamonds collect grease from skin and lotion as they are worn, so a routine clean keeps the facets reflecting light. Skip bleach, abrasive cleaners, and home ultrasonic or steam machines unless a jeweler has checked the piece first.
Can I clean pearl or emerald jewelry the same way as diamond jewelry?
No. Pearls should be wiped with a soft cloth after wear and cleaned with a barely damp cloth, never soaked and never put in an ultrasonic or steam cleaner. Emeralds and other soft or treated stones take a brief gentle wash or a damp wipe, not a soak or a machine clean. When a piece mixes stones, follow the most delicate one.
How often should settings be professionally checked?
Every 6 to 12 months for a piece worn daily, and about once a year for pieces worn occasionally. Go sooner, and stop wearing the piece, if a stone moves or rattles, a prong catches or looks damaged, or a clasp stops closing firmly.
Why store each piece separately?
Because contact damages jewelry in storage. Diamonds scratch other stones and metals, including other diamonds. Prongs snag, chains knot and strain, and soft stones abrade against harder neighbors. One piece per soft lined compartment or pouch prevents almost all of it.