Ring Size Guide

Measure the inside circumference of the finger in millimeters, or the inside diameter of a ring that already fits, then read the size from the table below. Measure at the end of the day, measure two or three times, and make sure the size slides over the knuckle and still sits snugly at the base. If you land between sizes, the guidance below explains which way to go. One free resizing is included with a ring from this store, with one exception: a full eternity band cannot be resized, so order the exact size for that style.

Quick facts

Question Short answer
What does a ring size measure? The inside circumference and inside diameter of the band
What does an EU size mean? Under ISO 8653, the EU size number is the inside circumference in millimeters
When should I measure? At the end of the day, at normal room temperature
What is the average size for women in the US? Between US 6 and US 7, with US 6 the most common, per GIA as cited by industry sources
What if the size is wrong? One free resizing is included, except on a full eternity band
Can a full eternity band be resized? No. Its stones run all the way around, so there is no plain metal to cut

Sizing checklist: measure at the end of the day, measure two or three times, check that the size passes the knuckle, use non stretch material, and read the size in millimeters first, then from the table.

How do you measure with string or paper?

This is the most common home method, and it gives you the inside circumference.

  1. Cut a thin strip of non stretch paper, or use a length of string or dental floss, about 10 cm long.
  2. Wrap it around the base of the finger the ring will sit on. It should feel snug, not tight.
  3. Check that it can slide over the knuckle. For most people the knuckle is wider than the base of the finger, so a size that cannot pass the knuckle will not go on.
  4. Mark where the strip meets itself.
  5. Lay it flat and measure the length in millimeters with a ruler. That length is the circumference.
  6. Read your size from the circumference column in the table below.

Repeat the measurement two or three times and use the reading that comes up most often. Do not use anything stretchy, and do not pull the strip tight.

How do you measure a ring that already fits?

This is the most reliable home method, because you are measuring a finished object rather than a finger.

  1. Choose a ring that fits well on the same finger, on the same hand, as the new ring. Ring fingers differ between hands.
  2. Lay it flat and measure straight across the inside, from inside edge to inside edge, at the widest point. That is the inside diameter.
  3. Measure in millimeters. One millimeter can shift the result by about half a size, so measure carefully, and measure again across a different angle and average the two if they differ.
  4. Read your size from the diameter column in the table below.

What is the full size conversion table?

Sizes are read from the same two measurements in every system. The US system uses numbers. The UK system uses letters. The EU system, under ISO 8653, uses the inside circumference in millimeters as the size number. UK letter charts vary by up to half a size between sources, so treat the letter as a guide and trust the millimeter measurement first.

US UK EU Inside diameter (mm) Inside circumference (mm)
4 H 1/2 47 14.9 46.8
4.5 I 1/2 48 15.3 48.0
5 J 1/2 49 15.7 49.3
5.5 K 1/2 50 16.1 50.6
6 L 1/2 52 16.5 51.9
6.5 M 1/2 53 16.9 53.1
7 N 1/2 54 17.3 54.4
7.5 O 1/2 56 17.7 55.7
8 P 1/2 57 18.1 57.0
8.5 Q 1/2 58 18.5 58.3
9 R 1/2 59 18.9 59.5
9.5 S 1/2 61 19.4 60.8
10 T 1/2 62 19.8 62.1

How should a ring fit?

A ring fits well when it slides over the knuckle with slight resistance, sits snugly at the base without squeezing, and does not spin freely. You should be able to remove it with a gentle twist and pull. If it slips off with no resistance at the knuckle, it is too loose. If it leaves a deep mark or will not pass the knuckle, it is too tight.

Fingers change during the day and with temperature. They are largest at the end of the day and in heat, and smaller in the morning and in the cold, by up to about half a size. Measure late in the day, at normal room temperature.

What should you do between sizes?

  • If your measurement falls between two sizes and the band is narrow, choose the larger size if the ring must pass a wide knuckle, and the smaller size if your knuckle is close in size to the base of your finger.
  • If the band is wide, go up. A wide band covers more of the finger and fits tighter than a narrow band in the same labeled size, so consider going up half a size for a wide style.
  • If you are between sizes on a ring that can be resized, remember that one free resizing is included, so a close size is not a final risk.
  • If you are between sizes on a full eternity band, stop and measure again, or have the size confirmed by any jeweler you trust before ordering. That style cannot be resized, so the ordered size is the size you keep.

How do you find a size in secret?

  • Measure a ring that already fits the right finger, using the diameter method above. Borrow it briefly and return it before it is missed.
  • Trace the inside circle of that ring on paper and measure across the circle later.
  • Ask a close friend or family member who may already know.
  • If none of that works, use the average as a starting point only. The average size for women in the US is between US 6 and US 7. An average is a guess about a population, not a measurement of a hand, so pair it with the free resizing below whenever the style allows it.

What does the one free resizing cover?

One free resizing is included with a ring from this store, as part of the same confirmed policies as the lifetime warranty and 30 day free returns with no restocking fee. Most rings can be sized up or down by about two sizes before the structure and design may be compromised, and a larger change can mean remaking the ring instead.

The exception is the full eternity band. A full eternity band carries diamonds all the way around the band. There is no plain metal section left to cut and rejoin, and working around a continuous row of stones risks loosening them. For that reason a full eternity band cannot be resized. Please order your exact size for a full eternity style. Half eternity styles keep a plain section at the back, which is what leaves room for resizing.

Pave bands and channel set bands also need care in resizing, because stones sit close along the band. If your ring has stones along the band, confirm the resizing options for that exact design before relying on a large size change.

Frequently asked questions

How do I measure my ring size at home without a ring sizer?

Wrap a thin strip of non stretch paper or string around the base of the finger, mark where it meets, and measure the length in millimeters. That length is the inside circumference. Read the size from the table on this page, and repeat the measurement two or three times.

What is the most accurate home method?

Measuring the inside diameter of a ring that already fits the same finger on the same hand. Lay the ring flat and measure straight across the inside in millimeters, then use the diameter column in the table.

What ring size is 17.3 mm?

An inside diameter of 17.3 mm is US 7, UK N 1/2, EU 54, with an inside circumference of 54.4 mm.

Should I size up for a wide band?

Yes, usually by half a size. A wide band touches more of the finger and feels tighter than a narrow band in the same labeled size.

What if I am between sizes?

For a narrow band, choose based on your knuckle, as explained above. For a wide band, go up. For a full eternity band, measure again and have the size confirmed before ordering, because that style cannot be resized.

Can an eternity band be resized under the free resizing policy?

No. The free resizing policy cannot change what the design allows. A full eternity band has stones all the way around and no plain metal to cut, so it cannot be resized. Order the exact size.

When is the best time to measure?

At the end of the day, at normal room temperature, when fingers are at their largest. Avoid measuring first thing in the morning or in the cold, which can read up to about half a size small.

Related links

Explore Watch Brands