Vacheron Constantin Overseas Tourbillon 6000V
What is the Vacheron Constantin Overseas Tourbillon 6000V?
The Vacheron Constantin Overseas Tourbillon 6000V is the tourbillon of the Overseas line: a 42.5 mm sports watch, only 10.39 mm thick, powered by the self winding calibre 2160. Its one big lesson is the peripheral rotor. Instead of a central oscillating weight sweeping across the back of the movement and covering much of it, calibre 2160 winds itself with a gold weight that travels around the outer edge of the movement. The tourbillon sits open at 6 o'clock, and the movement behind the sapphire case back stays in full view.
That layout does two jobs at once. Because the rotor runs around the perimeter rather than sitting on top of the movement, it adds almost no height: calibre 2160 is only 5.65 mm thick, which is how a self winding tourbillon ends up in a case 10.39 mm thick. And because nothing crosses the centre of the movement, the view through the transparent case back is unobstructed, so the finishing, the gear train and the back of the tourbillon carriage can all be seen at once. The calibre runs at 2.5 Hz (18,000 vibrations per hour), has 30 jewels and holds about 80 hours of power reserve, more than three days.
The carriage itself is openworked and shaped like the Maltese cross, the emblem of Vacheron Constantin. It completes one rotation per minute, so it doubles as the small seconds display: on the closed dial model the small seconds are read on the tourbillon carriage, and the carriage bar is hand bevelled, work the manufacturer launch material put at around 12 hours for that single component. Both versions covered in this guide are Hallmark of Geneva certified, and both use the Overseas interchangeable strap system, so the bracelet and straps swap without tools.
Lineage: The Overseas traces back to the 222 of 1977, became the Overseas collection in 1996, and was reinvented in 2016 as the third generation, with in house movements and the interchangeable strap system. Tourbillons arrived in the line with this reference: presented at SIHH in 2019 in steel with a blue dial, the 6000V was the first tourbillon ever offered in the Overseas collection. Its calibre 2160 had first appeared a year earlier, in 2018, in the Traditionelle collection. The skeleton version followed in 2022, the first skeleton tourbillon in the Overseas line, with the calibre redesigned as the 2160 SQ.
Quick facts
- First tourbillon in the Overseas collection, launched in 2019 in steel with a blue dial, with a skeleton version in Grade 5 titanium following in 2022.
- Calibre 2160, or the skeletonised 2160 SQ: self winding with a peripheral rotor, 30 jewels and about 80 hours of power reserve.
- 42.5 mm case, 10.39 mm thick, water resistant to 50 metres, with a transparent sapphire crystal case back.
- Openworked tourbillon carriage shaped like the Maltese cross, rotating once per minute and doubling as the small seconds.
- Three interchangeable wearing options from the factory: a metal bracelet plus rubber and leather straps.
At a glance: specifications
| Case size and material | 42.5 mm, 10.39 mm thick, in stainless steel (6000V/110A-B544) or Grade 5 titanium (6000V/110T-B935), with a transparent sapphire crystal case back |
|---|---|
| Movement / calibre | Calibre 2160 in the closed dial model and the skeletonised calibre 2160 SQ in the skeleton model, developed and manufactured by Vacheron Constantin, mechanical self winding with a gold peripheral rotor, 5.65 mm thick, 30 jewels, 2.5 Hz, Hallmark of Geneva certified |
| Power reserve | About 80 hours |
| Water resistance | 50 metres (5 bar) |
| Bracelet / strap | Interchangeable system with three factory options: a metal bracelet in steel or Grade 5 titanium to match the case, plus a dark blue rubber strap and a dark blue calfskin leather strap, on folding clasps |
How do the 6000V references decode, and what does the peripheral rotor change?
Read the full reference in three parts. 6000V is the Overseas Tourbillon base. The segment after the slash names the case material: 110A is stainless steel, and 110T is Grade 5 titanium, the T marking titanium. The code after the dash names the dial: B544 is the blue dial, and B935 is the skeleton dial. So the suffix is not decoration: a 110A watch and a 110T watch differ in metal, dial and movement designation, not just in colour.
| Full reference | Dial | Movement designation |
|---|---|---|
| 6000V/110A-B544 | Blue lacquered dial, sunburst satin finished, closed dial with the tourbillon open at 6 o'clock | Calibre 2160 |
| 6000V/110T-B935 | Skeleton dial: a sapphire dial over the fully openworked movement, with a blue minutes track | Calibre 2160 SQ |
The peripheral rotor is what makes both versions possible in this form. On the blue dial watch, the 22K gold peripheral rotor of calibre 2160 leaves the whole movement visible through the case back, where a conventional central rotor would cover it in turn as it swung. On the skeleton, the same idea is carried further: calibre 2160 SQ is the 2160 skeletonised throughout, with its architecture rethought, an anthracite grey NAC treatment on the mainplate and bridges, and a sapphire dial, so the movement is the dial. Skeletonising also cut the movement weight: the manufacturer gives 186 components for the 2160 SQ against 188 for the closed dial 2160, with the same 5.65 mm thickness, 30 jewels and 80 hour reserve. The titanium skeleton was also a first in its own right: the manufacturer launch material describes it as the first Vacheron Constantin watch made entirely of Grade 5 titanium, case, bezel, crown and bracelet included.
One detail separates the two carriages in use. Both rotate once per minute and carry the small seconds, but on the titanium skeleton the seconds are marked by one of the four screws securing the carriage, flame blued on the titanium model. Checking which reference you are looking at is therefore simple: blue closed dial and steel means B544 and calibre 2160, openworked sapphire dial and titanium means B935 and calibre 2160 SQ.
What should you check on any example?
- All three factory wearing options in the set: the metal bracelet and both additional straps, in the materials and colours correct for the reference, with the interchangeable system engaging and releasing cleanly and the correct folding clasps present.
- The tourbillon running correctly: the carriage should complete its rotation in about one minute, run smoothly and evenly, and the watch should hold a healthy reserve from the self winding peripheral rotor.
- Carriage condition: the openworked Maltese cross carriage and its hand bevelled bar should be free of damage, marks or signs of careless opening, and on the skeleton the flame blued seconds screw should be present and correct.
- The Hallmark of Geneva punch: confirm the Hallmark of Geneva certification for the movement and that it matches the paperwork for the watch, since the hallmark covers both the movement finishing and its Geneva origin.
- The view through the case back: because the peripheral rotor leaves the movement exposed, check that the movement is clean and unmarked and that the rotor travels freely around the edge of the calibre.
- The full reference on the warranty card: it should match the watch exactly, including the material segment and the dial code, 110A and B544 for steel and blue, 110T and B935 for titanium and skeleton.
A complete set for this family, per the store's listings, is:
- Original boxes, inner box and outer box
- Booklets and papers
- Warranty card
- Metal bracelet: stainless steel on the 6000V/110A-B544, titanium on the 6000V/110T-B935
- Blue rubber strap
- Blue calfskin leather strap
- For the skeleton 6000V/110T-B935, an additional original Vacheron Constantin deployant buckle
How do you buy from The Stellaris Collection?
Examples of this reference are listed on our site, and other examples can be sourced on request.
Warranty: while a manufacturer warranty is in force it applies; a watch out of manufacturer warranty carries a 1-year warranty from The Stellaris Collection. Purchases are completed directly with our team, by invoice, with payment by bank wire. Email info@thestellariscollection.com or call (213) 444-0926. By appointment only. We are an independent dealer, not an authorized Vacheron Constantin retailer.
Frequently asked questions
When was the Overseas Tourbillon 6000V launched?
It was presented at SIHH in 2019, in steel with a blue dial, as the first tourbillon in the Overseas collection. The calibre 2160 itself had first been presented in 2018, in the Traditionelle collection, and the skeleton version of the 6000V followed in 2022.
What is a peripheral rotor, and why does it matter here?
A peripheral rotor is an automatic winding weight that runs around the outer edge of the movement instead of pivoting at its centre. It matters for two reasons: it adds almost no thickness, helping calibre 2160 stay 5.65 mm thick in a 10.39 mm case, and it never covers the centre of the movement, so the whole calibre stays visible through the sapphire case back.
How thin is the 6000V?
The case is 10.39 mm thick at 42.5 mm across, and the movement inside it is 5.65 mm thick. That thinness is a direct result of the peripheral rotor layout, which avoids stacking a central rotor on top of the movement.
What is the difference between calibre 2160 and calibre 2160 SQ?
The 2160 SQ is the skeletonised version of the 2160, made for the skeleton model: the mainplate and bridges are fully openworked with an anthracite grey NAC treatment, the dial is sapphire, and the manufacturer gives it 186 components against 188 in the closed dial calibre. Thickness, jewel count and power reserve are the same: 5.65 mm, 30 jewels and about 80 hours.
Does the tourbillon also show the seconds?
Yes. The carriage completes one rotation per minute, so it doubles as the small seconds display. On the closed dial model the small seconds are read on the tourbillon carriage, and on the titanium skeleton one of the screws securing the carriage, flame blued, serves as the seconds indicator.
Is the 6000V Hallmark of Geneva certified?
Yes, both the closed dial and skeleton versions are Hallmark of Geneva certified. The hallmark, granted under the authority of the Canton of Geneva, certifies the origin of the movement and the standard of its craftsmanship and finishing, and it is one of the first things to confirm against the paperwork on any example.
New to these terms? See our watch glossary.