Lab-Grown vs Natural Diamonds

A lab-grown diamond and a natural diamond are both real diamonds. They have essentially the same chemical composition, crystal structure, and physical and optical properties. The difference is origin. A natural diamond formed in the earth. A lab-grown diamond was grown in a laboratory by one of two methods, HPHT or CVD. You cannot tell the two apart by looking, and neither can a jeweler with a standard loupe. Separating them takes laboratory equipment. What does differ is how each is reported by grading laboratories, how supply works, and what the origin means to you. Certification on this site is scoped in the site wording: center stones of 0.5 carats and above are certified, primarily by IGI.

Quick facts

Question Short answer
Is a lab-grown diamond a real diamond? Yes. It is diamond, grown in a laboratory
Is it the same material? Essentially yes: same composition, crystal structure, and properties
Can you tell by looking? No. Laboratory equipment is needed to separate lab-grown from natural
How is a lab-grown diamond made? HPHT (high pressure, high temperature) or CVD (chemical vapor deposition)
Is moissanite a lab-grown diamond? No. Moissanite and cubic zirconia are simulants, different materials
How are they graded now? IGI still issues full 4Cs style reports for lab-grown diamonds. Since 1 October 2025, GIA describes lab-grown diamonds as Premium or Standard instead of giving color and clarity grades
What certification applies here? Center stones of 0.5 carats and above are certified, primarily by IGI, as worded on the site

At a glance

Point Natural diamond Lab-grown diamond
Material Diamond: carbon in a cubic crystal structure Diamond: carbon in a cubic crystal structure
Hardness and light Hardness 10 on the Mohs scale, refractive index about 2.42 Hardness 10 on the Mohs scale, refractive index about 2.42
Origin Formed in the earth Grown in a laboratory by HPHT or CVD
How origin is told apart Laboratory equipment and testing Laboratory equipment and testing
Grading reports GIA uses color D to Z, clarity Flawless to Included, and a cut grade for round brilliants IGI issues full 4Cs style reports. Since 1 October 2025, GIA describes qualifying stones as Premium or Standard
Certification on this site Center stones of 0.5 carats and above are certified, primarily by IGI Center stones of 0.5 carats and above are certified, primarily by IGI

Tennis pieces on this site are not certified. That scope is covered in full in the certification section below.

What is actually the same?

Diamond is carbon arranged in a cubic crystal structure. That structure is what gives diamond its hardness, 10 on the Mohs scale, its refractive index of about 2.42, and its sparkle. GIA describes laboratory-grown diamonds as having essentially the same chemical composition and crystal structure as natural diamonds, and essentially the same physical, optical, and chemical properties.

In 2018 the US Federal Trade Commission removed the word natural from its definition of diamond in its Jewelry Guides. Under the current definition, a laboratory-grown stone that meets the material definition can be called a diamond, as long as its lab-grown origin is stated clearly next to the word diamond. That disclosure rule matters: a lab-grown diamond must be sold as lab-grown.

Durability is the same because the material is the same. A lab-grown diamond does not fade, cloud, or wear out differently from a natural diamond in normal wear. What wears on a ring over time is the metal setting, not the stone, for either origin.

What is different?

Origin, and everything that follows from origin.

  • Formation: a natural diamond formed in the earth under high pressure and high temperature and was carried to the surface. A lab-grown diamond was grown in a controlled laboratory in weeks rather than formed over a far longer natural process.
  • Supply: natural diamonds are mined in limited quantities. Lab-grown diamonds are manufactured, so supply can grow with production.
  • Grading reports: the laboratories now report the two origins differently in one important case, covered in the certification section below.
  • Growth features: laboratories separate the two origins by trace features and growth patterns that show only under specialized testing. Those features are not visible in wear and do not change how the stone looks or lasts.
  • Meaning: for some buyers, formation in the earth is part of the value. For others, a modern grown origin is the point. That is a preference, not a quality grade.

This guide makes no claim about resale value for either origin. Value over time depends on the individual stone, the seller, and the market at the time of sale, and no figure is stated here because no single figure can be verified for all stones.

How are lab-grown diamonds made? HPHT and CVD in plain words

HPHT stands for high pressure, high temperature. A small diamond seed is placed with a carbon source in a press. The press applies very high pressure and heats the material to roughly 1300 to 1600 degrees Celsius. Carbon dissolves and then forms as diamond crystal on the seed, in conditions modeled on how diamonds form in the earth.

CVD stands for chemical vapor deposition. A diamond seed plate sits in a sealed chamber. Carbon rich gases are introduced and broken down into a plasma at low pressure and at lower temperatures than HPHT, roughly 700 to 1200 degrees Celsius. Carbon settles onto the seed layer by layer and the crystal grows upward.

Neither method makes a better or a less real diamond. Both produce diamond. Some CVD grown crystals receive a post growth HPHT treatment to improve color, and grading reports disclose post growth treatment in their comments when a laboratory detects and reports it. When you compare stones, compare the finished stone and its report, not the growth method on its own.

What is not a lab-grown diamond?

A simulant is a different material that looks like diamond. It is not diamond of any origin.

  • Cubic zirconia is zirconium dioxide. Its hardness is about 8 to 8.5 on the Mohs scale.
  • Moissanite is silicon carbide. Its hardness is about 9.25 on the Mohs scale, and its higher dispersion can give it a more rainbow like sparkle than diamond.
  • White sapphire is corundum, another different material.

Under the FTC Jewelry Guides, calling a simulant a diamond, with or without a lab-grown qualifier, is deceptive. A lab-grown diamond is not a simulant, because it is diamond. A simulant is not a lower grade of diamond. It is a different material with its own name, and it should be sold under that name.

How does certification work for each origin?

A grading report, often called a certificate, is an independent laboratory description of one diamond: its measurements, carat weight, color, clarity, and finish grades. It is not an appraisal and it does not state a value. You can verify a report number on the laboratory own website, and many reports correspond to a laser inscription on the diamond girdle, the thin outer edge of the stone.

For natural diamonds, GIA grading uses the familiar scales: color from D to Z, clarity from Flawless to Included, and a cut grade for round brilliants.

For lab-grown diamonds, the picture split in 2025:

  • IGI continues to issue full 4Cs style reports for lab-grown diamonds, with individual color, clarity, and, for round brilliants, cut grades, plus the growth method noted on many reports.
  • GIA changed its service on 1 October 2025. Its Laboratory-Grown Diamond Quality Assessment now describes a qualifying lab-grown diamond as Premium or Standard, based on a combined assessment of clarity, color, polish, symmetry, and, for round brilliants, cut. Premium requires D color, VVS clarity or better, Excellent polish and symmetry, and an Excellent cut grade for round brilliants. A stone that does not meet the minimum criteria for Standard receives no GIA assessment under this service. The minimum size for submission is 0.15 carats, and each assessed stone girdle is laser inscribed with the term Laboratory-Grown and the assessment number. GIA reports for lab-grown diamonds issued before this change, with individual grades, remain part of the market, so read the report in front of you and its date rather than assuming its format.

On this site, certification is worded plainly: center stones of 0.5 carats and above are certified, primarily by IGI. Digital certificates are available before you buy, per the Diamonds page wording. That scope is about loose diamonds and Ring Studio center stones. It does not extend certification claims to finished tennis jewelry. Tennis pieces on this site are not certified, and nothing in this guide should be read as saying otherwise.

What to read on the report:

  • Verify the report number on the laboratory website.
  • Check the stated origin on the report.
  • On an IGI lab-grown report, read the individual color, clarity, and finish grades.
  • On a GIA lab-grown assessment from October 2025 onward, read Premium or Standard and the listed criteria, rather than expecting individual color and clarity grades.

How should you choose between lab-grown and natural?

Ask three questions:

  1. Does origin carry meaning for you? If formation in the earth matters, choose natural. If a grown origin sits well with you, lab-grown gives you the same material.
  2. Where do you want the specification to go? Because the two origins sit at different points in the market, the same overall plan can lead to a different size or grade in each origin. Compare finished stones and their reports, not origin labels alone.
  3. Which report do you want to read? If you want individual color and clarity grades on a lab-grown stone, an IGI report gives them. If you are comparing natural stones, expect the traditional scales.

Then make the choice inside Ring Studio, where you pick a setting and then choose a certified natural or lab-grown diamond, or start stone first on the Diamonds page.

Frequently asked questions

Are lab-grown diamonds real diamonds?

Yes. They are diamond, with essentially the same chemical composition, crystal structure, and physical and optical properties as natural diamonds. The FTC removed the word natural from its diamond definition in 2018, and lab-grown origin must be disclosed clearly when the stone is sold.

Can a jeweler tell a lab-grown diamond from a natural one?

Not by eye and not with a standard loupe. The two are separated by laboratory testing that reads growth features and trace characteristics. A grading report states the origin, which is one reason to buy a stone with a report you can verify.

Do lab-grown diamonds last as long as natural diamonds?

Yes. They are the same material, with the same hardness of 10 on the Mohs scale. Neither origin fades or clouds in normal wear. On a ring, the metal setting is what needs maintenance over time.

What is the difference between HPHT and CVD?

HPHT grows diamond under high pressure and high temperature, around a seed in a press. CVD grows diamond layer by layer from carbon rich gas in a low pressure chamber. Both produce real diamond. Judge the finished stone and its grading report, not the method alone.

Are lab-grown diamonds certified?

They can be. IGI issues full 4Cs style reports for lab-grown diamonds. Since 1 October 2025, GIA assesses lab-grown diamonds as Premium or Standard rather than issuing color and clarity grades. On this site, center stones of 0.5 carats and above are certified, primarily by IGI.

Is moissanite the same as a lab-grown diamond?

No. Moissanite is silicon carbide, a different material that looks like diamond. A lab-grown diamond is diamond. Moissanite is a simulant and should be sold under its own name.

Does a grading report tell me what the diamond is worth?

No. A grading report describes the stone. It is not an appraisal and it does not state a value.

Related links

Explore Watch Brands